Parameters 
                    
                        
                        
                        
                        
                            Nozzle Spacing: 
                                
                         
                        
                         
                        
                            Pipe Size:
                                
                         
                        
                         
                        
                        
                     
                 
                
                
                    Design Information 
                    
                        
                            Pressure at Nozzle: 
                            
                            
                            psi
                         
                        
                         
                        
                            Nozzles:
                            4
                         
                        
                         
                        
                            Total Water Flow:
                            14.4 gpm
                         
                        
                         
                        
                            Total Air Flow:
                            0.4 cfm
                         
                        
                         
                        
                            Manifold Pressure Loss:
                            0.0 psi
                         
                        
                         
                        
                            Pump must produce at least 
                                14.4 gpm with 
                            
                                6.8 ft (2.9 psi) of vertical head pressure.
                         
                        
                     
                 
                
                    Disclaimers 
                    
                        
                            - This design tool is provided as-is and only respresents a general configuration.
 
                            - You are solely responsible with verifying the proper configuration, bill-of-material, flow rates, pipe sizes, etc.
 
                            - Any product that has been used, cut, glued, etc. may not be returned.
 
                         
                     
                 
             
            
         
    
 
                     |